FAQs
If you have Fast Boot enabled and you want to get into the BIOS setup. Hold down the F2 key, then power on. That will get you into the BIOS setup Utility. You can disable the Fast Boot Option here.
Why is BIOS setup not opening? ›
So, if your PC cannot enter BIOS, then there could be a few issues, such as: You're pressing the wrong buttons, i.e., F2 instead of F10, F10, or DEL. Your motherboard's CMOS battery has gone bad. RAM or other hardware preventing it from booting into BIOS.
How do I force BIOS access? ›
Windows: accessing the BIOS
Before hitting the restart button, hold down the [Shift] key. While the system reboots, the normal Windows start screen will not appear, instead the Boot Options menu that provides access to the BIOS will open up. An alternative way to open the boot menu is via the system settings.
How do I turn off Fast Boot in BIOS? ›
The location and name of this option may vary depending on your BIOS version and manufacturer, but it is usually found under the boot or advanced tab. If you find the fast boot option, you can toggle it on or off by using the arrow keys and the enter key.
How do I get into BIOS with Fast Boot enabled MSI? ›
Luckily, you can access BIOS after your PC boots up. To do that, open the Start menu, and then hold the Shift key and click on the Restart option. Then click Troubleshoot > Advanced options > UEFI firmware. After that, restart your computer as required to enter the BIOS screen.
How do I fix a dead BIOS? ›
How to fix corrupted BIOS firmware
- Boot into the BIOS and reset it to factory settings by locating the option to Load Setup Defaults.
- Unplug the computer and open the side panel to access the motherboard. Locate the CMOS battery and remove it from the motherboard. ...
- On older motherboards try resetting the jumper.
Because a BIOS is critical to making your PC run, updating it carries a bit more risk than other software updates. If a BIOS update goes wrong, it could stop your motherboard from working correctly and potentially stop your computer from starting as expected.
How do I force Windows 10 to enter BIOS? ›
How to enter the BIOS on a Windows 10 PC
- (Image credit: Future) Select Update & Security.
- (Image credit: Future) Select Recovery from the left menu.
- (Image credit: Future) Click Restart Now under Advanced startup. ...
- (Image credit: Future)
- Click Advanced options.
- Your system will restart and take you to the BIOS.
A BIOS password helps prevent unauthorized users from making changes to the computer's hardware and software settings. But a BIOS password can also be a liability: If the computer owner forgets their password or an employee turns in their machine without disclosing their BIOS password, the computer won't boot up.
How do I force Windows 10 to boot into BIOS? ›
How to boot into UEFI or BIOS from Windows 11 or Windows 10
- Click Start and then select Settings.
- Click Update & Security.
- On the left side, click Recovery.
- Under Advanced start-up, click Restart Now.
- Click Troubleshoot.
- Click Advanced options.
- Select UEFI Firmware Settings.
System stability: Fast startup involves saving system information to a file, which can sometimes become corrupted or cause other stability issues with your computer. By disabling fast startup, you can help to ensure that your system runs smoothly and reliably.
Is disabling fast boot bad? ›
Rest assured, it is perfectly safe to turn off Fast Startup, that will not cause any problems with Windows or your hardware and you will not really notice any difference in the time it takes your PC to boot up.
Is it safe to enable fast boot in BIOS? ›
The main disadvantage of fast boot is that it can cause some compatibility and stability issues with some devices and software. Since fast boot skips some BIOS checks and tests, it may not detect some hardware changes or updates, such as new drives, cards, or peripherals.
How to reset BIOS? ›
How to reset the BIOS from the BIOS interface
- Turn on the computer.
- Tap the F2 key several times until Entering Setup appears.
- Reset the BIOS to factory defaults. ...
- Press the Esc key and select Save and exit or Exit.
- Press the Enter key to save all changes and exit the BIOS setup screen.
- The computer restarts.
Using the Setup Key
- Here's a list of some of the most common setup keys by manufacturer: Acer: F2 or DEL. ASUS: F2 or Del. Dell: F2 or F12. HP: ESC or F10. Lenovo: F2 or Fn + F2. Lenovo Desktops: F1. Lenovo ThinkPads: Enter + F1. ...
- If you don't hit the key in time, Windows will load and you will have to reboot and retry.
You may be able to reset your BIOS by restarting in the BIOS utility and selecting “Setup Defaults” or something similar. If you can't start your computer up properly, try removing and replacing the CMOS battery in your motherboard. Resetting the motherboard jumper is a good option if you can't access the CMOS battery.
How do I get to the BIOS setup or boot menu? ›
To access BIOS, you need to restart your computer and press a specific key or combination of keys during the initial boot process. The exact key or keys depend on your computer model and manufacturer, but some of the most common ones are F2, F10, F12, Del, or Esc.
